Mounting Board install

1. 01 Pick your spotAbout 6 ft up on a clear wall, away from walkways. Find your studs and check for wires and pipes first.
2. 02 Mount the boardLevel the board and drive the 2" silver screws through the long slots into at least two studs.
3. 03 Line up the GrabbersHold each Grabber on the board's pre-drilled guide marks. No measuring.
4. 04 Screw them onUse the short 5/8" black screws that come with the board, not the drywall anchors from the Grabber box. Give each Grabber a firm tug.
5. 05 Load your gearDry gear only. Check everything over the next 24 hours.

Check for wiring or pipes before you drill. Don't hang above walkways, work areas, or valuables. If unsure, contact a local professional.