The MAX install

1. 01 Pick your spotHold your longest board up first so the tail and fins hang clear of the floor, then mark where the MAX goes. Check for wires and pipes before you drill.
2. 02 Mark the holesHold the MAX level and use it as your template to mark all 6 holes.
3. 03 Set the anchorsIn drywall, predrill each mark with one of the included screws, then screw the 6 anchors in. Going into a stud or plywood? Skip the anchors and screw directly into the board. A MAX holds up to 40 lb, so a stud gives the strongest hold.
4. 04 Screw it onLine it up, drive the 6 #8 screws until snug, then give it a firm tug.
5. 05 Load your boardSlide the board's edge into the 3.25" opening. One board per MAX, up to 40 lb. Surf, wake and waterski only: skis and tools go on the OG or Mini.

Check for wiring or pipes before you drill. Don't hang above walkways, work areas, or valuables. If unsure, contact a local professional.