The Hangout install

1. 01 Place itOn its own, or between two Minis to make room for wide tools like fan rakes. Each piece is 4⅔" wide.
2. 02 Mark the holesHold it level and mark your holes. In a row, butt it right up against the Mini beside it.
3. 03 Mount itIn drywall, predrill each mark with one of the included screws, then screw the anchors in. Going into a stud or plywood? Skip the anchors and screw directly into the board. Line it up and drive the screws until snug.
4. 04 Hang your stuffHelmets, small bags, towels, cords and gloves: anything with a loop goes on the hook.

Check for wiring or pipes before you drill. Don't hang above walkways, work areas, or valuables. If unsure, contact a local professional.