Grab Bar Wall Mount install

1. 01 Pick your spotGarage, mudroom or gear room: somewhere you pass on your way out.
2. 02 Mount itLevel it and mark your holes. In drywall, predrill each mark with one of the included screws, then screw the anchors in. Going into a stud or plywood? Skip the anchors and screw directly into the board.
3. 03 Park your Grab BarSnap it onto the steel bracket when you get home, and grab it on your way out.

Check for wiring or pipes before you drill. Don't hang above walkways, work areas, or valuables. If unsure, contact a local professional.