Grab Bar Bundle install

1. 01 Magnet testIt needs a steel body panel. If a fridge magnet sticks, the Grab Bar will too.
2. 02 Mount the Wall MountLevel it where you head out and mark your holes. In drywall, predrill each mark with one of the included screws, then screw the anchors in. Going into a stud or plywood? Skip the anchors and screw directly into the board.
3. 03 Use it on the carSnap it onto a steel panel and lean your gear: boards in the center, skis on the fins, handlebars at the ends.
4. 04 Park it at homeSnap it back onto the Wall Mount when you're done.

Check for wiring or pipes before you drill. Don't hang above walkways, work areas, or valuables. If unsure, contact a local professional.