Why a Wall Snowboard Mount Is Worth Doing Right
Snowboards are large, awkward to store, and easy to damage when they don’t have a proper home. Leaning a board in a corner might work temporarily, but over time it leads to scuffed graphics, damaged edges, and cluttered spaces.
That’s why many riders look for a wall snowboard mount—not just to save space, but to protect their board and keep storage intentional.
A good wall snowboard mount does more than hold a board. It supports the board properly, keeps it off the floor, and fits naturally into the space where it’s installed.
What a Wall Snowboard Mount Should Do
Before choosing any mount, it helps to know what actually matters for snowboard storage.
A proper wall snowboard mount should:
-
Keep the board off the ground
-
Support the board without pinching or stressing it
-
Allow airflow so moisture can dry
-
Be easy to use after a long day riding
-
Fit cleanly into garages, gear rooms, or living spaces
If a mount forces the board into place or creates pressure points, it may cause long-term damage.
Gravity Grabber as a Wall Snowboard Mount
Gravity Grabber is a wall-mounted storage system designed to hold skis and snowboards upright in a natural, supported position.
As a wall snowboard mount, it works well because:
-
The board rests securely between the arms instead of being clamped
-
There’s no pinching of tips or edges
-
The board stays elevated and out of traffic areas
-
Vertical storage reduces floor clutter
-
Air can circulate around the base and edges
This makes Gravity Grabber a practical choice for riders who want storage that protects their board and stays easy to use every day.
Why Vertical Wall Storage Works Well for Snowboards
Snowboards are built to flex, not to sit flat on concrete or lean at awkward angles.
Vertical wall storage:
-
Reduces pressure on the board
-
Keeps edges away from moisture on the floor
-
Prevents boards from being stepped on or knocked over
-
Makes boards easy to grab and put away
A wall snowboard mount that supports the board upright helps preserve both performance and appearance over time.
A System That Adapts to Your Space
One of the advantages of using Gravity Grabber as a wall snowboard mount is that it works as part of a modular system, not a single fixed solution.
Different garages and gear rooms have different needs. Gravity Grabber offers options that help the system adapt without changing how boards are stored.
Mounting a Snowboard on Slatwall
If your garage or shop uses slatwall instead of drywall, mounting can be a challenge.
The Gravity Grabber Slatwall Adapter allows Gravity Grabber to mount directly to standard 3-inch slatwall, creating a clean, secure setup that can move as your layout changes.
This is useful for:
-
garages with modular wall systems
-
workshops
-
retail displays
-
spaces that evolve over time
Instead of drilling into drywall or studs, the adapter keeps the wall snowboard mount flexible.
Protecting the Wall Below the Board
Another common issue with wall snowboard mounts is wall damage.
When boards are stored vertically, the bottom of the board can scuff, scrape, or dent the wall over time—especially in tight spaces.
The Gravity Grabber Bump Bar addresses this by protecting the wall where the lower end of the board rests. It helps:
-
prevent scuffs and dents
-
keep storage areas looking clean
-
extend the life of wall surfaces
It’s a small detail, but one that matters when storage is used every day.
More Than Just a Winter Setup
While Gravity Grabber is designed with snowboards in mind, it doesn’t become wasted space when winter ends.
Once boards come down, the same wall snowboard mount can be used to store other long gear that fits securely, helping keep spaces organized year-round.
This makes the system feel permanent rather than seasonal.
Where a Wall Snowboard Mount Works Best
Gravity Grabber is commonly used as a wall snowboard mount in:
-
garages
-
basements
-
gear rooms
-
apartments or condos
-
entryways and mudrooms
The most important factor is keeping boards dry, supported, and out of high-traffic areas.
How to Use a Wall Snowboard Mount Correctly
No matter the system, a few habits help protect boards:
-
Wipe moisture off the board before storage
-
Avoid forcing the board into tight mounts
-
Leave space for airflow
-
Mount boards where they won’t be bumped frequently
Good habits combined with good hardware make the biggest difference.
FAQ: Wall Snowboard Mounts
What is the best wall snowboard mount?
The best wall snowboard mount supports the board naturally, keeps it off the floor, and allows airflow without pinching or stressing the board.
Is it safe to hang a snowboard on the wall?
Yes. Wall-mounted storage is one of the safest ways to store a snowboard when done with proper support.
Can Gravity Grabber hold snowboards securely?
Yes. Gravity Grabber is designed to hold skis and snowboards upright without clamping or pinching tips.
Can Gravity Grabber be mounted on slatwall?
Yes. With the Gravity Grabber Slatwall Adapter, it can mount directly to standard 3-inch slatwall systems.
How do I protect the wall under my snowboard?
Using a wall protection solution like a bump bar helps prevent scuffs and dents where the board rests.
A Complete Approach to Snowboard Wall Storage
A good wall snowboard mount isn’t just about hanging a board—it’s about creating a system that works with your space and your habits.
Gravity Grabber offers a clean, flexible approach to snowboard storage, with options that adapt to different walls and protect both gear and surfaces. When storage is easy, boards get put away properly—and that’s what keeps them in good shape season after season.
