How to Install Multiple Gravity Grabbers the Easy Way

Installing multiple Gravity Grabbers is one of the best ways to level up your garage organization—but if you do it the hard way, it can quickly turn into a time-consuming and hole-filled project.

The good news: there’s a much easier way to do it that saves time, keeps everything aligned, and protects your walls.

The Challenge With Installing Multiple Grabbers

If you install each Gravity Grabber individually, you have to:

• Measure and mark each placement
• Level every unit
• Drill multiple holes per grabber

This adds up fast.

For example, installing 4 grabbers individually can require up to 16 holes in your wall.

That means more time, more room for error, and more permanent damage to your space.

The Easy Way: Use a Mounting Board

Instead of installing each grabber directly into your wall, you can mount them onto a single board first.

A mounting board acts as a base that attaches to your wall, allowing you to install multiple grabbers in one clean, efficient setup.

This approach simplifies the entire process.

Step-by-Step: The Easy Installation Method

Step 1: Mount the Board to the Wall

Start by installing your mounting board.

With a board, you typically only need 4 holes total to secure it to the wall.

This replaces what could have been 12–16+ holes if you installed grabbers individually.

Make sure the board is:

• Level
• Anchored securely into studs or proper wall anchors

Once this step is done, the hardest part is over.

Step 2: Attach Your Gravity Grabbers

Now that the board is in place, installing grabbers becomes quick and straightforward.

Simply:

• Position each grabber where you want it
• Secure it directly to the board

No need to re-measure your wall or worry about inconsistent spacing.

Step 3: Adjust Spacing and Layout

One of the biggest advantages of using a mounting board is flexibility.

You can:

• Evenly space your grabbers
• Adjust positioning as needed
• Add more later without re-drilling your wall

This makes your setup feel clean and intentional instead of pieced together.

How Many Grabbers Can a Mounting Board Hold?

A single mounting board can hold up to 3 Gravity Grabbers, making it easy to build a compact, organized system.

If you need more storage, you can install multiple boards side by side to scale your setup.

Why This Method Is Better

1. Fewer Holes in Your Wall

Instead of drilling 16+ holes, you only need about 4 per board.

That means:

• Less wall damage
• Easier installation
• Less repair work later

2. Faster Installation

You install one board instead of multiple individual units.

After that, everything else is quick and repeatable.

3. Cleaner, More Professional Look

A mounting board keeps everything aligned and evenly spaced.

Your setup looks intentional—not like a collection of random installs.

4. Easier to Expand Later

Need more storage later?

Just add another grabber to the board or install an additional board—no need to start over or drill a new set of holes.

Where to Get a Mounting Board

If you want the easiest way to install multiple grabbers, you can check out the mounting board here: https://www.gravitygrabber.com/collections/mounting-boards/products/mounting-board-baltic-birch

It’s designed specifically to simplify installation, reduce wall damage, and create a clean, modular setup.

FAQs

How many holes do I need with a mounting board?

Typically around 4 holes total per board, compared to 12–16+ when installing multiple grabbers individually.

Can I install more grabbers later?

Yes. You can add up to 3 grabbers per board and expand further by adding more boards.

Is this method beginner-friendly?

Yes. Mounting one board is much simpler than installing multiple individual units.

Does it make a visual difference?

Absolutely. It creates a cleaner, more organized, and professional-looking setup.

Do I need a mounting board?

If you’re installing multiple grabbers, it’s the easiest and cleanest way to do it.